The promo pics for the Star Trek TNG Benzite for M4 had me doing a double take - someone has stuck some kind of frame weapon-sight on top of the front of the TOS phaser, Which made me look at the actual TOS phaser product, and at least that doesn't have that dreadful sight on it. But it doesn't feature the actual phaser sight either. They DID actually design a sighting system when they originally designed the phaser for TOS, and created a couple of 'hero' props for filming with the sighting system included and 'working' - these were the actual 'hero props' used by Shatner and Nimoy, etc when originally filming TOS. Most peole aren't aware of this because it's only - very briefly - shown open twice in all the TOS episodes, and in neither case is the actor shown using it. But it's detailed - with detailed photos of the hero props and freeze frames from those brief moments actually on screen - in the articles on the making of the props and the design sheets, and it's a shame it wasn't used as they just had them doing ridiculous shooting from the hip like in the old westerns most of the time. It was also well thought out in the parts which are visible on the props even when it's closed, and the system deserved to be seen, given how much thought went into it. Basiclally:
So you have the small phaser 1 'hand phaser' unit, used alone some times, othertimes clipped into the top of the 'handle' that increases power and range to make the pistol shaped and sized phaser 2. On the top of the phaser 1 there's a metallic grille and a thumb-wheeel. The thumb-wheel (both on a 'real' phaser and on the hero working props), which most people don't know what it's for and guess it's a power control or something, is actually the control to open the phaser's weapon sight. Rotating the thumb-wheel causes the grille to pivot up at the rear, hinging at the front. As it comes up, the rear of the grille has a small screen attached to it which is therefore lifted up into view and in the sight-line of someone using the phaser if they hold it in a proper aiming pose - a screen showing the sighting image on a 'real' phaser, the view to the front with a target reticle etc, alhtough actually just a perspex rod cut in half (though lit by a small bulb so it glowed in the hero prop), the width of the grille and the flat part facing the person using the phaser in the actual prop. At the front of the type-1 phaser, there's a piece of perspex immediately around the nozzle, above, left and right, in the front face of the phaser 1 that the nozzle is attached to. This is supposed to be the front of the sensor that is transmitting the image of what the phaser 1 is pointed at to the screen that's been rotated up. Now, when the phaser 1 is snapped into the handle to create the phaser 2, as in the prop here, there was in the hero prop another piece of persepx mounted into the BACK of the raised front part of the phaser 2 handle, positioned so when the phaser 1 is snapped in, the 'sensor' rectangle of perspex in the front of the phaser 1 around its emitter nozzle sits against the matching perspex in the handle unit, so this is where the sensor take from the phaser 2 handle is passed through to the sighting system in the phaser 1, and on the front of the phaser 2, above and round its emitetr nozzle, is another piece of persepx, facing forwards. That's the sensor in use when the phaser two is being aimed, the input being passed back to the phaser 1 and displayed on the screen when the thumb-wheel is rotated and the grille hinges up, raising the screen.
So that is the actual aiming system which the people who originally designed the TOS phaser before filming of the TOS episodes thought right through, very carefully, and which was actually in the hero props on screen, though actually in all the episodes someone is actually seen rotating the thumb-wheel, causing the grille on top of the phaser 1 unit to to pivot up, lifting the 'screen' into view at the back precisely once, plus on one other occasion a phaser is seen very briefly with the grille already angled and the 'screen' up. It actually all makes sense, is well thought out, must have involved a lot of work to conceptualise, lots more work to come up with a 'working' version for the hero props for the show. It's a great shame it wasn't regularly and obviously used on the show and instead we just had Shatner, Kelley et al carrying on with the bogus hip shooting they'd been doing in Western series and cop shows in the 50s and 60s.
The TNG phasers were much worse, and utterly impossible to use as weapons, with no feasible way to aim them (the invented excuse some have come up with that there's an AI targetting system in the phasers in TNG/DS9/VOY so it doesn't matter which way you point it, the AI angles the beam to hit your target makes zero sense - how does it know what our target is, and why then do they miss so often?). Apparently the TOS phaser2s were actually a good ergonomic design as handguns and aimed very naturally. And the series of evolving phaser 2s in the TOS films wre also good, with natural grips and points of aim, culmiating in the so-called 'Assault phasers' in films V and VI actually being built on real Beretta 92F frames, with the power packs going into the real magazine-well in the M9 frame under all the aluminium and plastic used to make the real weapon look like a phaser. Wasted design work again as they did make a small separate hand phaser 1 (of which a few photos survive), which slots inside the top cowl of the 'Assault Phaser' Type 2 when you rack the cowl forwards (as the 'marines' are seen doing in the back of the shuttle on the rescue mission in 5). We only really got actually practical 23rd century phasers of a design that coud feasibly work from an aiming ergonomics point of view in those later Star Treks with the two phaser rifle designs that were created for the First Contact movie and then started appearing in episodes.